ProMicro Logo

PC Based Industrial Automation

Featured Product

This months featured product is the ADAM-4520 RS-232 to RS-485 converter.
Link to the Product Page

Products:

Contact us

Tel: 087-701-8559
Tel: 011-706-7913

Fax: 086-671-6808

Email: info@promicro.co.za
To email an enquiry: Click here

Physical:
52 Shepherd Avenue
Bryanston
2021

Postal:
P O Box 593
Cramerview
2060

Get Directions

External Links:

EKI-1361 1-Port RS-232/422/485 to 802.11a/b/g/n WLAN Serial Device Server

Download PDFDownload the EKI-1361 data sheet.
Request a quotation Click here to request a quotation for the EKI-1361

Overview

EKI-1361The EKI-1200 series Modbus gateways are bi-directional gateways for integrating new and existing Modbus/RTU and Modbus/ASCII serial devices to newer TCP/IP networked-based devices. The EKI-1361 features two independent Ethernet ports and MAC addresses to provide a redundant networking mechanism to guarantee Ethernet networking reliability. They provide a simple and cost-effective way to bring the advantage of remote management and data accessibility to thousand of devices that can not connect to a network. The EKI-1361 provides a feature that can allow users to select master or slave operation mode for each serial port. They not only allow an Ethernet master to control serial slaves, but also allow serial masters to control Ethernet slaves.

Features

  • Link any serial device to an IEEE 802.11a/b/g/n network
  • Supports 802.11n MIMO 2T2R
  • WLAN transmission rates up to 300 Mbps
  • Supports secure access with WEP, WPA/WPA2-Personal, WPA/WPA2-Enterprise
  • Provides COM port redirection, TCP, UDP, and pair connection modes
  • Supports up to 921.6 kbps and any baud rate setting
  • Provides web-based configuration and Windows utility
  • Allows a maximum of five hosts to access one serial port
  • Modbus TCP and Modbus RTU support
  • Selective dual band 2.4 or 5 GHz

Specifications

Ethernet Communications

• Speed10/100/1000 Mbps
• No. of ports1
• Port Connector8pin RJ45

Wireless LAN Communications

• CompatabilityIEEE 802.11a/b/g/n
• SpeedUp to 300Mbps
• Network ModeInfrastructure
• ANtenna ConnectorReverse SMA
• No. of Antenna2 Supports 2T2R)
• Free Space RangeOpen space 100m
• Wireless SecurityWEP, WPA/WPA2-Personal, WPA/WPA2-Enterprise

Serial Communications

• Port TypeSoftware selectable RS-232/422/485 port
• No. of Ports1 port
• ConnectorsD-sub 9 male
• Data Bits5, 6, 7 or 8
• Stop Bits1, 1.5 or 2
• ParityNone, Even, Odd, Space or Mark
• Flow ControlXON/XOFF, RTS/CTS
• Baud Rate50 bps to 921.6 kbps
• Serial SignalsRS-232: TxD, RxD, DTR, DSR, RTS, CTS, DCD, RI, GND
RS-422: TxD+, TxD-, RxD+, RxD-, GND
RS-485: Data+, Data-, GND
• Protection15kV ESD protection for all signals

Software

• Driver SupportWindows XP/7/8.1/10.
Windows Server 2003/2008/2012/2016/2019 and Linux
• Utility SoftwareAdvantech EKI Device Configuration Utility
• Operation ModesAccess Point mode/Station mode
COM port redirection mode (Virtual COM)
TCP/UDP Server (polling) mode
TCP/UDP client (event handling) mode
• ConfigurationWindows utility, Telnet console, Web Browser
• ProtocolsICMP, IP, TCP, UDP, BOOTP, DHCP, Auto IP, Telnet, SNMP, HTTP, DNS, SMTP, ARP, NTP

Mechanical

• Dimensions30 x 140 x 95 mm (W x H x D)
• EnclosureMetal shell with solid mounting hardware
• Weight0,5Kg
• MountingDIN-rail, Panel
• IP RatingIP30

General

• LED IndicatorsSystem: Power, System Status
LAN: Link/Active
Serial: Tx, Rx
• Reboot TriggerBuilt-in WDT (watchdog timer)

Power Requirements

• Input Voltage12 ~ 48 VDC, redundant dual inputs
• Power ConnectorScrew Terminal Block
• Power Consumption8W

Environment

• Operating Temperature-40 ~ 75°C
• Storage Temperature-40 ~ 80°C
• Operating Humidity10 ~ 95% RH

Regulatory Approvals

• EMCCE, FCC Part 15 Subpart B (Class A)

Ordering Informationtion

•EKI-13611-port 802.11a/b/g/n WLAN Serial Device Server